![]() ![]() Now you just can sit and relax while the camera does all the work. The SD LED lamp will flash every few seconds to let you know that is still alive. You don't have to worry if the LCD turns off. Set 20 or 30 seconds delay for LCD timeout and Global Draw on ML's power menu.Exposure compensation -2 EV: this will avoid the image to be rendered too bright, risking hiding the lightning off a blown out background.Low ISO (100 or 200) ensure a long exposure: that will help in capturing several impressions of the lightning strike.I'm more concerned about long exposure rather than DOF, though. Av mode with f:8 or f:11, depending on the depth of field I need.I've spent a couple of hours testing it out and found no issue with it. Lastly, sensor temperature may be a concern, so be sure to monitor that, as you don't want it to get too high. Also, obviously, there’s a good chance of getting your camera wet with rain. Using LiveView consumes a good deal your battery, so you’ll want to plan for that. Next, select Motion Detect on ML's menu, and just let it sit there for the whole duration of the storm or as long as you like. Set the camera on a tripod with LiveView turned on. That is the extension of the tampering on the original firmware the Magic Lantern guys have done. The only modification to the original firmware is the ability to boot software from the card, which is turned off by default on Canon's firmware. ![]() It is not a hack, or a modified firmware, but it runs alongside Canon's own firmware, booting from the SD card every time you turn the camera on. The power of nature calls everyone's attention, but lighnings in particular have been until now a trial and error matter. Lightnings and storms are always a powerful subject. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |